Browsing by Author "Reynolds, Michael A."

Now showing 1 - 2 of 2
  • Thumbnail Image
    Item
    A Simple and Rapid Method of Forming Double-Sided TiO2 Nanotube Arrays
    (Wiley, 2022) Conrad, Christian L.; Elias, Welman C.; Garcia-Segura, Sergi; Reynolds, Michael A.; Wong, Michael S.; Nanosystems Engineering Research Center for Nanotechnology-Enabled Water Treatment
    Highly ordered TiO2 nanostructures, known as nanotube arrays (NTAs), exhibit potential in various energy, chemical sensing, and biomedical applications. Owing to its simplicity and high degree of control, titanium anodization serves as the prevailing NTA synthesis method. However, the practicality of this approach is marred by sluggish and inconsistent growth rates, on the order of 10 nm min−1. Growth rates strongly depend on the electrolyte conductivity, yet most reports neglect to consider this property as a measured and controllable parameter. Here, we have systematically determined a broad set of conditions (at 60 V applied potential, elevated temperatures) that allow researchers to fabricate NTAs quickly and simply. By modulating conductivity through variation of bulk electrolyte temperature and the controlled addition of several hydroxy acid species, we achieve consistent accelerated growth up to 10 times faster than traditional methods. We find that regulating the solution conductivity within a desired region (e. g., ∼800–1000 μS cm−1) enabled the fabrication of double-sided NTA layers of around 10 μm and 90 μm NTA in 10 and 180 min, respectively.
  • Thumbnail Image
    Item
    Room-Temperature Catalytic Treatment of High-Salinity Produced Water at Neutral pH
    (American Chemical Society, 2020) Yin, Y. Ben; Coonrod, Christian L.; Heck, Kimberly N.; Said, Ibrahim A.; Powell, Camilah D.; Guo, Sujin; Reynolds, Michael A.; Wong, Michael S.
    Produced waters from hydraulic fracturing (HFPW) operations greatly challenge traditional water treatment technologies due to the high concentrations of total dissolved solids (TDS), highly complex and variable water matrices, and significant residual hydrocarbon content. We recently reported the unusual ability of a PdAu catalyst to degrade phenol in simulated HFPW at room temperature by generating H2O2 in situ from formic acid and air. Phenol removal occurred at TDS levels as high as ∼10 000 ppm (ionic strength I = 0.3 M), but the catalytic reaction required pH < 4 to proceed. Here, we find that PdAu, Pd, and Au degraded phenol in the pH 5–8 range by using hydroxylamine as the hydrogen source in place of formic acid. Pd exhibited the highest activity, and Au the least. Activity of the monometallic catalysts decreased >70% as TDS increased from 0 to ∼100 000 ppm (I = 3 M), whereas the PdAu was comparatively less affected (∼50% activity decrease). All catalysts remained active at TDS levels as high as 100 000 ppm. The majority of the hydroxylamine formed N2, however this reaction generated additional nitrite/nitrate anion byproducts with nitrogen selectivities ranging from 0.5% to 11.5%, depending on the catalyst identity and reaction salinity. To demonstrate one possible flow treatment process concept, we constructed and tested a recirculating trickle bed reactor that removed 28% phenol from simulated HFPW over 48 h. These results show the potential of oxidation catalysis as a treatment approach for produced water and other high-salinity industrial wastewaters.