Three Dimensional Engineered Structures from Graphene Oxide Atomic Layers

dc.contributor.advisorPulickel, Ajayanen_US
dc.creatorVinod, Soumyaen_US
dc.date.accessioned2017-08-02T19:11:01Zen_US
dc.date.available2017-08-02T19:11:01Zen_US
dc.date.created2016-05en_US
dc.date.issued2016-04-20en_US
dc.date.submittedMay 2016en_US
dc.date.updated2017-08-02T19:11:01Zen_US
dc.description.abstractTwo dimensional (2D) atomic layered materials have recently gained much attention due to their novel physical properties. However, to be utilized for direct applications, there is a need to build three dimensional (3D) structures from them that can retain the intrinsic properties of the material while leading to novel behavior originating from the macroscopic assembly. Graphene, the first 2D material to be discovered, have unique set of properties that have led to numerous studies. While most initial applications of graphene concentrated on creating high quality single layer graphene, further unraveling its potential in multifunctional use demanded large scale production for creating 3D structures. This brought into prominence Graphene Oxide (GO) that has graphene layers with oxygen functionalities present on basal planes and edges and could be synthesized in large quantities by chemical approaches. Originally, the major advantage of GO was as an intermediate compound for mass producing graphene through chemical reduction. However, GO by itself was found to demonstrate exciting properties as a result of the structure and functional groups present. GO has emerged as a major precursor in creating various engineered carbonaceous materials. In this work, GO is used as the fundamental unit for building macroscopic systems such as foam, film and composite with detailed analysis of their formation and properties. Chapter 1 discusses the emergence of 2D materials, the popularity of graphene based materials and their use as building blocks for creating 3D structures. Background studies on GO is provided and their advantages to be used as precursor in developing 3D materials are reviewed. The final section of the chapter focuses on the experimental methods used for synthesis and characterization of the different 3D structures built from GO. In Chapter 2, unique structural formation of a foam from the interaction of GO and hexagonal boron nitride (h-BN) is investigated. Electron microscope imaging and mechanical characterization provide insights into the formation and the mechanical response of the foam. The novel orderly stacked layered architecture demonstrates enhanced mechanical strength and structural stability even at increased temperature. In Chapter 2, free standing GO films consisting tightly packed GO layers are synthesized and the effect on the sliding of layers due to the interaction of oxygenated species present is investigated. A new mechanism of stick-slip motion that translates to strain rate dependent plasticity where the GO film behavior transitions from brittle to ductile with decrease in strain rate is observed. Chapter 3 explores GO as a substitute for epoxies in two part epoxy systems towards synthesizing thermally conducting epoxies. The interactions of the epoxy functional groups in GO with polymercaptan based epoxy hardener forms a thermosetting resin that provides high thermal stability and adhesion between surfaces. This elevates GO as the main constituent in the epoxy system and eliminates its limitation as a filler material. The implications of the material for thermal management applications are discussed. Chapter 5 summarizes the findings and reviews the challenges associated with building controlled macroscopic architecture from 2D fundamental units followed by future advancement directions.en_US
dc.format.mimetypeapplication/pdfen_US
dc.identifier.citationVinod, Soumya. "Three Dimensional Engineered Structures from Graphene Oxide Atomic Layers." (2016) Diss., Rice University. <a href="https://hdl.handle.net/1911/96268">https://hdl.handle.net/1911/96268</a>.en_US
dc.identifier.urihttps://hdl.handle.net/1911/96268en_US
dc.language.isoengen_US
dc.rightsCopyright is held by the author, unless otherwise indicated. Permission to reuse, publish, or reproduce the work beyond the bounds of fair use or other exemptions to copyright law must be obtained from the copyright holder.en_US
dc.subjectGraphene Oxideen_US
dc.subjectThree Dimensionalen_US
dc.subjectFoamen_US
dc.subjectFilmen_US
dc.subjectCompositeen_US
dc.titleThree Dimensional Engineered Structures from Graphene Oxide Atomic Layersen_US
dc.typeThesisen_US
dc.type.materialTexten_US
thesis.degree.departmentMaterials Science and NanoEngineeringen_US
thesis.degree.disciplineEngineeringen_US
thesis.degree.grantorRice Universityen_US
thesis.degree.levelDoctoralen_US
thesis.degree.nameDoctor of Philosophyen_US
Files
Original bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
VINOD-DOCUMENT-2016.pdf
Size:
3.26 MB
Format:
Adobe Portable Document Format
License bundle
Now showing 1 - 2 of 2
No Thumbnail Available
Name:
PROQUEST_LICENSE.txt
Size:
5.84 KB
Format:
Plain Text
Description:
No Thumbnail Available
Name:
LICENSE.txt
Size:
2.61 KB
Format:
Plain Text
Description: