Behavior of steel beams subjected to alternating inelastic strains

dc.contributor.advisorVann, W. P.
dc.creatorOzier, Lynn Davis
dc.date.accessioned2016-04-21T12:01:57Z
dc.date.available2016-04-21T12:01:57Z
dc.date.issued1969
dc.description.abstractThis thesis reports an experimental study of the load deflection behavior and fialure characterisitcs of cantilevered rolled steel beams which undergo alternating inelastic strains. The beams are clamped into a rigid fixture to avoid connection problems, and are loaded cyclically between equal positive and negative values of end deflection which are of a magnitude such that fracture occurs at a relatively low number of cycles. The boundary conditions for twist and for lateral deflection are approximately "fixed-pinned". The development of flange, web, and lateral buckling is observed along with the effects of this buckling on the load capacity and the development of failure. The experimental parameters studied are the values of the flange width-to-thickness ratio, b/t (9.97 and 16.0); the web depth-to-thickness ratio, d/w (16.0and34.7); the length ratio, L/ry (30 and 60); and the magnitude of the end deflection at which each beam is cycled. It is found that, in general, after two or three cycles of loading the load-deflection hysteresis loops become smaller, due to a decrease in the peak cyclic loads and to a reduction in stiffness. These losses in load capacity and stiffness are related to the development of the different types of buckling.
dc.format.digitalOriginreformatted digitalen_US
dc.format.extent109 ppen_US
dc.identifier.callnoThesis C.E. 1969 OZIERen_US
dc.identifier.citationOzier, Lynn Davis. "Behavior of steel beams subjected to alternating inelastic strains." (1969) Master’s Thesis, Rice University. <a href="https://hdl.handle.net/1911/89242">https://hdl.handle.net/1911/89242</a>.
dc.identifier.digitalRICE0279en_US
dc.identifier.urihttps://hdl.handle.net/1911/89242
dc.language.isoeng
dc.rightsCopyright is held by the author, unless otherwise indicated. Permission to reuse, publish, or reproduce the work beyond the bounds of fair use or other exemptions to copyright law must be obtained from the copyright holder.
dc.titleBehavior of steel beams subjected to alternating inelastic strains
dc.typeThesis
dc.type.materialText
thesis.degree.departmentChemical and Biomolecular Engineering
thesis.degree.disciplineEngineering
thesis.degree.grantorRice University
thesis.degree.levelMasters
thesis.degree.nameMaster of Science
Files
Original bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
RICE0279.pdf
Size:
8.74 MB
Format:
Adobe Portable Document Format