Transport of Surfactant and Foam in Porous Media for Enhanced Oil Recovery Processes
| dc.contributor.advisor | Hirasaki, George J. | en_US |
| dc.contributor.committeeMember | Biswal, Sibani Lisa | en_US |
| dc.contributor.committeeMember | Miller, Clarence A. | en_US |
| dc.contributor.committeeMember | Gonnermann, Helge M. | en_US |
| dc.creator | Ma, Kun | en_US |
| dc.date.accessioned | 2013-09-16T15:54:48Z | en_US |
| dc.date.accessioned | 2013-09-16T15:54:56Z | en_US |
| dc.date.available | 2013-09-16T15:54:48Z | en_US |
| dc.date.available | 2013-09-16T15:54:56Z | en_US |
| dc.date.created | 2013-05 | en_US |
| dc.date.issued | 2013-09-16 | en_US |
| dc.date.submitted | May 2013 | en_US |
| dc.date.updated | 2013-09-16T15:54:56Z | en_US |
| dc.description.abstract | The use of foam-forming surfactants offers promise to improve sweep efficiency and mobility control for enhanced oil recovery (EOR). This thesis provides an in depth understanding of transport of surfactant and foam through porous media using a combination of laboratory experiments and numerical simulations. In particular, there are several issues in foam EOR processes that are examined. These include screening of surfactant adsorption onto representative rock surfaces, modeling of foam flow through porous media, and studying the effects of surface wettability and porous media heterogeneity. Surfactant adsorption onto rock surfaces is a main cause of foam chromatographic retardation as well as increased process cost. Successful foam application requires low surfactant adsorption on reservoir rock. The focus of this thesis is natural carbonate rock surfaces, such as dolomite. Surfactant adsorption was found to be highly dependent on electrostatic interactions between surfactants and rock surface. For example, the nonionic surfactant Tergitol 15-S-30 exhibits low adsorption on dolomite under alkaline conditions. In contrast, high adsorption of cationic surfactants was observed on some natural carbonate surfaces. XPS analysis reveals silicon and aluminum impurities exist in natural carbonates, but not in synthetic calcite. The high adsorption is due to the strong electrostatic interactions between the cationic surfactants and negative binding sites in silica and/or clay. There are a number of commercial foam simulators, but an approach to estimate foam modeling parameters from laboratory experiments is needed to simulate foam transport. A one-dimensional foam simulator is developed to simulate foam flow. Chromatographic retardation of surfactants caused by adsorption and by partition between phases is investigated. The parameters in the foam model are estimated with an approach utilizing both steady-state and transient experiments. By superimposing contour plots of the transition foam quality and the foam apparent viscosity, one can estimate the reference mobility reduction factor (fmmob) and the critical water saturation (fmdry) using the STARS foam model. The parameter epdry, which regulates the abruptness of the foam dry-out effect, can be estimated by a transient foam experiment in which 100% gas displaces surfactant solution at 100% water saturation. Micromodel experiments allow for pore-level visualization of foam transport. We have developed model porous media systems using polydimethylsiloxane. We developed a simple method to tune and pattern the wettability of polydimethylsiloxane (PDMS) to generate porous media models with specific structure and wettability. The effect of wettability on flow patterns is observed in gas-liquid flow. The use of foam to divert flow from high permeable to low permeable regions is demonstrated in a heterogeneous porous micromodel. Compared with 100% gas injection, surfactant-stabilized foam effectively improves the sweep of the aqueous fluid in both high and low permeability regions of the micromodel. The best performance of foam on fluid diversion is observed in the lamella-separated foam regime, where the presence of foam can enhance gas saturation in the low permeable region up to 45.1% at the time of gas breakthrough. In conclusion, this thesis provides new findings in surfactant adsorption onto mineral surfaces, in the methodology of estimating foam parameters for reservoir simulation, and in micromodel observations of foam flow through porous media. These findings will be useful to design foam flooding in EOR processes. | en_US |
| dc.format.mimetype | application/pdf | en_US |
| dc.identifier.citation | Ma, Kun. "Transport of Surfactant and Foam in Porous Media for Enhanced Oil Recovery Processes." (2013) Diss., Rice University. <a href="https://hdl.handle.net/1911/71996">https://hdl.handle.net/1911/71996</a>. | en_US |
| dc.identifier.slug | 123456789/ETD-2013-05-564 | en_US |
| dc.identifier.uri | https://hdl.handle.net/1911/71996 | en_US |
| dc.language.iso | eng | en_US |
| dc.rights | Copyright is held by the author, unless otherwise indicated. Permission to reuse, publish, or reproduce the work beyond the bounds of fair use or other exemptions to copyright law must be obtained from the copyright holder. | en_US |
| dc.subject | Foam mobility control | en_US |
| dc.subject | Enhanced oil recovery | en_US |
| dc.subject | Flow in porous media | en_US |
| dc.subject | Surfactant adsorption | en_US |
| dc.subject | Foam modeling | en_US |
| dc.subject | Micromodel | en_US |
| dc.subject | Chemical engineering | en_US |
| dc.title | Transport of Surfactant and Foam in Porous Media for Enhanced Oil Recovery Processes | en_US |
| dc.type | Thesis | en_US |
| dc.type.material | Text | en_US |
| thesis.degree.department | Chemical and Biomolecular Engineering | en_US |
| thesis.degree.discipline | Engineering | en_US |
| thesis.degree.grantor | Rice University | en_US |
| thesis.degree.level | Doctoral | en_US |
| thesis.degree.name | Doctor of Philosophy | en_US |