A new simplified compositional simulator

dc.contributor.advisorMiller, Clarence A.
dc.creatorBuchwalter, James Lee
dc.date.accessioned2009-06-04T00:12:18Z
dc.date.available2009-06-04T00:12:18Z
dc.date.issued1994
dc.description.abstractA new simplified fully implicit compositional simulator has been developed. This simulator is different from existing models because it combines the conventional black oil equations with a compositional injection component equation. Sets of two dimensional pvt and injection component K value tables at constant pressure and variable mole fraction injection component are generated using a cubic equation of state used in the compositional simulator. The data are generated from a series of cells loaded with the initial composition of the reservoir. Pore volume increments of injection gas are cycled through the cells in sequence, with oil and gas volumes passing downstream in proportions calculated by the relative permeability curves. This pvt test replicates a one dimensional compositional cycling process at fixed pressure. The resulting data describes a unique compositional path through the phase diagram for constant pressure and variable mole fraction injection gas, and this path is independent of cell position in the simulator. The simulator runs at speeds that far exceed the speeds in current compositional simulators, primarily because the speed is independent of the number of components. Small problems with several hundred cells typically run about 10 times faster, and larger speed increases are realized for bigger problems. The simulator has been tested successfully for gas cycling projects including the Third SPE Comparative Solution Project and CO2 flooding projects. Results for constant and variable pressure cycling, with and without vertical crossflow were in good agreement with a compositional model.
dc.format.extent192 p.en_US
dc.format.mimetypeapplication/pdf
dc.identifier.callnoTHESIS CH.E. 1994 BUCHWALTER
dc.identifier.citationBuchwalter, James Lee. "A new simplified compositional simulator." (1994) Diss., Rice University. <a href="https://hdl.handle.net/1911/16711">https://hdl.handle.net/1911/16711</a>.
dc.identifier.urihttps://hdl.handle.net/1911/16711
dc.language.isoeng
dc.rightsCopyright is held by the author, unless otherwise indicated. Permission to reuse, publish, or reproduce the work beyond the bounds of fair use or other exemptions to copyright law must be obtained from the copyright holder.
dc.subjectChemical engineering
dc.titleA new simplified compositional simulator
dc.typeThesis
dc.type.materialText
thesis.degree.departmentChemical Engineering
thesis.degree.disciplineEngineering
thesis.degree.grantorRice University
thesis.degree.levelDoctoral
thesis.degree.nameDoctor of Philosophy
Files
Original bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
9514158.PDF
Size:
4.74 MB
Format:
Adobe Portable Document Format