Electrical and Computer Engineering

Permanent URI for this community

https://hdl.handle.net/1911/8315

Browse

Browsing Electrical and Computer Engineering by Subject "802.11"

Now showing 1 - 2 of 2
  • Thumbnail Image
    Item
    Coordination and Interference in 802.11 Networks: Inference, Analysis and Mitigation
    (2013-09-16) Magistretti, Eugenio; Knightly, Edward W.; Gurewitz, Omer; Johnson, David B.; Sabharwal, Ashutosh
    In the last decade, 802.11 wireless devices data-rates have increased by three orders of magnitude, while communications experiencing low throughput are still largely present. Such throughput loss is a fundamental problem of wireless networking that is difficult to diagnose and amend. My research addresses two key causes of throughput loss: MAC layer protocol overhead and destructive link interference. First, I design WiFi-Nano reducing the channel access overhead by an order of magnitude leveraging an innovative speculative technique to transmit preambles. This new concept is based on simultaneous preamble transmission and detection via a self-interference cancellation design, and paves the way to the realization of the collision detection paradigm in wireless networks. Next, I propose 802.11ec (Encoded Control), the first 802.11-based protocol that eliminates the overhead of control packets. Instead, 802.11ec coordinates node transmissions via a set of predefined pseudo-noise codewords, resulting in the dramatic increase of throughput and communication robustness. Finally, I design MIDAS, a model-driven network management tool that alleviates low throughput wireless links identifying key corrective actions. MIDAS' key contribution is to reveal the fundamental role of node transmission coordination in characterizing destructive interference. I implement WiFi-Nano, 802.11ec, and MIDAS using a combination of WARP FPGA-based radio boards, custom emulation platforms, and network simulators. The results obtained show that WiFi-Nano increases the network throughput by up to 100%, 802.11ec improves network access fairness by up to 90%, and MIDAS identifies corrective actions with a prediction error as low as 20%.
  • Thumbnail Image
    Item
    Full-Duplex Infrastructure Nodes: Achieving Long Range with Half-duplex Mobiles
    (2012-09-05) Everett, Evan; Sabharwal, Ashutosh; Knightly, Edward W.; Aazhang, Behnaam
    One of the primary sources of inefficiency in today's wireless networks is the half-duplex constraint - the assumption that nodes cannot transmit and receive simultaneously in the same band. The reason for this constraint and the hurdle to full-duplex operation is self-interference: a node's transmit signal appears at its own receiver with very high power, desensitizing the receiver electronics and precluding the reception of a packet from a distant node. Recent research has demonstrated that full-duplex can indeed be feasible by employing a combination of analog and digital self-interference cancellation mechanisms. However, two glaring limitations remain. The first is that the full-duplex state-of-the-art requires at least two antennas and extra RF resources that space-constrained mobile devices may not be able to accommodate. The second limitation is range: current full-duplex demonstrations have been for ranges less than 10~m. At longer distances nodes must transmit with higher power to overcome path loss, and the power differential between the self-interference and the signal-of-interest becomes more that the current cancellation mechanisms can handle. We therefore present engineering solutions for answering the following driving questions: (a) can we leverage full-duplex in a network consisting mostly of half-duplex mobiles? and (b) can we extend the range of full-duplex by achieving self-interference suppression sufficient for full-duplex to outperform half-duplex at ranges exceeding 100 m? In answer to the first question, we propose moving the burden of full-duplexing solely to access points (APs), enabling the AP to boost network throughput by receiving an uplink signal from one half-duplex mobile, while simultaneously transmitting a downlink signal to another half-duplex mobile in the same band. In answer to the second question we propose an AP antenna architecture that uses a careful combination of three mechanisms for passive suppression of self-interference: directional isolation, absorptive shielding, and cross-polarization. Results from a 20 MHz OFDM prototype demonstrate that the proposed AP architecture can achieve 90+ dB total self-interference suppression, enabling >50% uplink rate gains over half-duplex for ranges up to 150 m.