R-3 Repository :: Browsing by Author "Yan, Zheng"

Browsing by Author "Yan, Zheng"

Now showing 1 - 9 of 9

Chemical Vapor Deposition Synthesis of Graphene-Based Materials and Chemical Modulation of Graphene Electronics
(2013-09-18) Yan, Zheng; Tour, James M.; Hauge, Robert H; Ajayan, Pulickel M
Graphene, a two-dimensional sp2-bonded carbon material, has attracted enormous attention due to its excellent electrical, optical and mechanical properties. Recently developed chemical vapor deposition (CVD) methods could produce large-size and uniform polycrystalline graphene films, limited to gas carbon sources, metal catalyst substrates and degraded properties induced by grain boundaries. Meanwhile, pristine monolayer graphene exhibits a standard ambipolar behavior with a zero neutrality point in field-effect transistors (FETs), limiting its future electronic applications. This thesis starts with the investigation of CVD synthesis of pristine and N-doped graphene with controlled thickness using solid carbon sources on metal catalyst substrates (chapter 1), and then discusses the direct growth of bilayer graphene on insulating substrates, including SiO2, h-BN, Si3N4 and Al2O3, without needing further transfer-process (chapter 2). Chapter 3 discusses the synthesis of high-quality graphene single crystals and hexagonal onion-ring-like graphene domains, and also explores the basic growth mechanism of graphene on Cu substrates. To extend graphene’s potential applications, both vertical and planar graphene-carbon nanotube hybrids are fabricated using CVD method and their interesting properties are investigated (chapter 4). Chapter 5 discusses how to use chemical methods to modulate graphene’s electronic behaviors.
Graphene-carbon nanotube hybrid materials and use as electrodes
(2016-09-27) Tour, James M.; Zhu, Yu; Li, Lei; Yan, Zheng; Lin, Jian; Rice University; United States Patent and Trademark Office
Provided are methods of making graphene-carbon nanotube hybrid materials. Such methods generally include: (1) associating a graphene film with a substrate; (2) applying a catalyst and a carbon source to the graphene film; and (3) growing carbon nanotubes on the graphene film. The grown carbon nanotubes become covalently linked to the graphene film through carbon-carbon bonds that are located at one or more junctions between the carbon nanotubes and the graphene film. In addition, the grown carbon nanotubes are in ohmic contact with the graphene film through the carbon-carbon bonds at the one or more junctions. The one or more junctions may include seven-membered carbon rings. Also provided are the formed graphene-carbon nanotube hybrid materials.
Growth of graphene films from non-gaseous carbon sources
(2015-08-04) Tour, James; Sun, Zhengzong; Yan, Zheng; Ruan, Gedeng; Peng, Zhiwei; Rice University; United States Patent and Trademark Office
In various embodiments, the present disclosure provides methods of forming graphene films by: (1) depositing a non-gaseous carbon source onto a catalyst surface; (2) exposing the non-gaseous carbon source to at least one gas with a flow rate; and (3) initiating the conversion of the non-gaseous carbon source to the graphene film, where the thickness of the graphene film is controllable by the gas flow rate. Additional embodiments of the present disclosure pertain to graphene films made in accordance with the methods of the present disclosure.
Methods for production of single-crystal graphenes
(2017-12-19) Tour, James M.; Yan, Zheng; Rice University; United States Patent and Trademark Office
In some embodiments, the present disclosure pertains to methods of forming single-crystal graphenes by: (1) cleaning a surface of a catalyst; (2) annealing the surface of the catalyst; (3) applying a carbon source to the surface of the catalyst; and (4) growing single-crystal graphene on the surface of the catalyst from the carbon source. Further embodiments of the present disclosure also include a step of separating the formed single-crystal graphene from the surface of the catalyst. In some embodiments, the methods of the present disclosure also include a step of transferring the formed single-crystal graphene to a substrate. Additional embodiments of the present disclosure also include a step of growing stacks of single crystals of graphene.
Rebar Graphene
(American Chemical Society, 2014) Yan, Zheng; Peng, Zhiwei; Casillas, Gilberto; Lin, Jian; Xiang, Changsheng; Zhou, Haiqing; Yang, Yang; Ruan, Gedeng; Raji, Abdul-Rahman O.; Samuel, Errol L.G.; Hauge, Robert H.; Yacaman, Miguel Jose; Tour, James M.; Richard E. Smalley Institute for Nanoscale Science and Technology
As the cylindrical sp2-bonded carbon allotrope, carbon nanotubes (CNTs) have been widely used to reinforce bulk materials such as polymers, ceramics, and metals. However, both the concept demonstration and the fundamental understanding on how 1D CNTs reinforce atomically thin 2D layered materials, such as graphene, are still absent. Here, we demonstrate the successful synthesis of CNT-toughened graphene by simply annealing functionalized CNTs on Cu foils without needing to introduce extraneous carbon sources. The CNTs act as reinforcing bar (rebar), toughening the graphene through both π–π stacking domains and covalent bonding where the CNTs partially unzip and form a seamless 2D conjoined hybrid as revealed by aberration-corrected scanning transmission electron microscopy analysis. This is termed rebar graphene. Rebar graphene can be free-standing on water and transferred onto target substrates without needing a polymer-coating due to the rebar effects of the CNTs. The utility of rebar graphene sheets as flexible all-carbon transparent electrodes is demonstrated. The in-plane marriage of 1D nanotubes and 2D layered materials might herald an electrical and mechanical union that extends beyond carbon chemistry.
Rebar Graphene from Functionalized Boron Nitride Nanotubes
(American Chemical Society, 2015) Li, Yilun; Peng, Zhiwei; Larios, Eduardo; Wang, Gunuk; Lin, Jian; Yan, Zheng; Ruiz-Zepeda, Francisco; José-Yacamán, Miguel; Tour, James M.; Richard E. Smalley Institute for Nanoscale Science and Technology
The synthesis of rebar graphene on Cu substrates is described using functionalized boron nitride nanotubes (BNNTs) that were annealed or subjected to chemical vapor deposition (CVD) growth of graphene. Characterization shows that the BNNTs partially unzip and form a reinforcing bar (rebar) network within the graphene layer that enhances the mechanical strength through covalent bonds. The rebar graphene is transferrable to other substrates without polymer assistance. The optical transmittance and conductivity of the hybrid rebar graphene film was tested, and a field effect transistor was fabricated to explore its electrical properties. This method of synthesizing 2D hybrid graphene/BN structures should enable the hybridization of various 1D nanotube and 2D layered structures with enhanced mechanical properties.
Rebar hybrid materials and methods of making the same
(2018-02-20) Tour, James M.; Yan, Zheng; Peng, Zhiwei; Hauge, Robert H.; Li, Yilun; Rice University; United States Patent and Trademark Office
In some embodiments, the present disclosure pertains to methods of forming a reinforcing material by: (1) depositing a first material onto a catalyst surface; and (2) forming a second material on the catalyst surface, where the second material is derived from and associated with the first material. In some embodiments, the first material includes, without limitation, carbon nanotubes, graphene nanoribbons, boron nitride nanotubes, chalcogenide nanotubes, carbon onions, and combinations thereof. In some embodiments, the formed second material includes, without limitation, graphene, hexagonal boron nitride, chalcogenides, and combinations thereof. In additional embodiments, the methods of the present disclosure also include a step of separating the formed reinforcing material from the catalyst surface, and transferring the separated reinforcing material onto a substrate without the use of polymers. Additional embodiments of the present disclosure pertain to reinforcing materials formed by the aforementioned methods.
Terahertz and Infrared Spectroscopy of Gated Large-Area Graphene
(American Chemical Society, 2012) Ren, Lei; Zhang, Qi; Yao, Jun; Sun, Zhengzong; Kaneko, Ryosuke; Yan, Zheng; Nanot, Sébastien L.; Jin, Zhong; Kawayama, Iwao; Tonouchi, Masayoshi; Tour, James M.; Kono, Junichiro; Applied Physics Program
We have fabricated a centimeter-size single-layer graphene device with a gate electrode, which can modulate the transmission of terahertz and infrared waves. Using time-domain terahertz spectroscopy and Fourier-transform infrared spectroscopy in a wide frequency range (10–10 000 cm–1), we measured the dynamic conductivity change induced by electrical gating and thermal annealing. Both methods were able to effectively tune the Fermi energy, EF, which in turn modified the Drude-like intraband absorption in the terahertz as well as the “2EF onset” for interband absorption in the mid-infrared. These results not only provide fundamental insight into the electromagnetic response of Dirac fermions in graphene but also demonstrate the key functionalities of large-area graphene devices that are desired for components in terahertz and infrared optoelectronics.
Three-dimensional mesostructures as high-temperature growth templates, electronic cellular scaffolds, and self-propelled microrobots
(National Academy of Sciences, 2017) Yan, Zheng; Han, Mengdi; Shi, Yan; Badea, Adina; Yang, Yiyuan; Kulkarni, Ashish; Hanson, Erik; Kandel, Mikhail E.; Wen, Xiewen; Zhang, Fan; Luo, Yiyue; Lin, Qing; Zhang, Hang; Guo, Xiaogang; Huang, Yuming; Nan, Kewang; Jia, Shuai; Oraham, Aaron W.; Mevis, Molly B.; Lim, Jaeman; Guo, Xuelin; Gao, Mingye; Ryu, Woomi; Yu, Ki Jun; Nicolau, Bruno G.; Petronico, Aaron; Rubakhin, Stanislav S.; Lou, Jun; Ajayan, Pulickel M.; Thornton, Katsuyo; Popescu, Gabriel; Fang, Daining; Sweedler, Jonathan V.; Braun, Paul V.; Zhang, Haixia; Nuzzo, Ralph G.; Huang, Yonggang; Zhang, Yihui; Rogers, John A.
Exploiting advanced 3D designs in micro/nanomanufacturing inspires potential applications in various fields including biomedical engineering, metamaterials, electronics, electromechanical components, and many others. The results presented here provide enabling concepts in an area of broad, current interest to the materials community––strategies for forming sophisticated 3D micro/nanostructures and means for using them in guiding the growth of synthetic materials and biological systems. These ideas offer qualitatively differentiated capabilities compared with those available from more traditional methodologies in 3D printing, multiphoton lithography, and stress-induced bending––the result enables access to both active and passive 3D mesostructures in state-of-the-art materials, as freestanding systems or integrated with nearly any type of supporting substrate.

Browsing by Author "Yan, Zheng"

Results Per Page

Sort Options