Browsing by Author "He, Qixin"
Now showing 1 - 4 of 4
Results Per Page
Sort Options
Item A near-infrared gas sensor system based on tunable laser absorption spectroscopy and its application to CH4/C2H2 detection(SPIE, 2017) He, Qixin; Zheng, Chuantao; Liu, Huifang; Wang, Yiding; Tittel, Frank K.A near-infrared (NIR) dual-channel differential gas sensor system was experimentally demonstrated based on tunable laser absorption spectroscopy (TLAS) and wavelength modulation spectroscopy (WMS). The sensor consists of four modules, including distributed feedback (DFB) lasers for the detection of targeted gases, a custom portable DFB driver compatible for butterfly-packaged DFB lasers, a 20cm-long open-reflective gas-sensing probe and a custom cost-effective lock-in amplifier for harmonic signal extraction. The optical and electrical modules were integrated into a standalone sensor system, which possesses advantages of user-friendly operation, good stability, small volume and low cost. With different DFB lasers, the sensor system can be used to detect different gases. Two DFB diode lasers with emission wavelengths of 1.65 μm and 1.53 μm were used to detect CH4 and C2H2, respectively. Standard CH4 and C2H2 samples were prepared and experiments were carried out to evaluate the performance of the two-gas TLAS sensor system. The relation between the second harmonic amplitudes (2f) and gas concentrations was obtained for the two gases by means of calibration. Both the detection error and the limit of detection (LoD) were determined experimentally. The sensor system will be useful in industrial trace gas monitoring due to its use of a low-loss optical fiber and an open-reflective gas-sensing probe.Item Dual-feedback mid-infrared cavity-enhanced absorption spectroscopy for H2CO detection using a radio-frequency electrically-modulated interband cascade laser(The Optical Society, 2018) He, Qixin; Zheng, Chuantao; Lou, Minhan; Ye, Weilin; Wang, Yiding; Tittel, Frank K.A mid-infrared cavity-enhanced sensor system was demonstrated for the detection of formaldehyde (H2CO) using a continuous-wave (cw) interband cascade laser (ICL) centered at 3599 nm. A compact Fabry-Perot (F-P) cavity with a physical size of 38 × 52 × 76 mm3 was developed consisting of two concave mirrors with a radius of curvature of 80 mm and a reflectivity of 99.8% at 3.6 μm. Different from the widely reported electro-optical (EO) external modulation based Pound-Drever-Hall (PDH) locking technique, a radio-frequency electrical internal modulation based PDH technique was used for locking the laser mode to the cavity mode. A dual-feedback control on the laser current and on the piezo transducer (PZT) displacement was utilized for further stabilizing mode locking. A 20 m effective optical path length was achieved with a cavity length of 2 cm and a finesse of 1572. The effectiveness and sensitivity of the sensor system were demonstrated by targeting an absorption line at 2778.5 cm−1 for H2CO measurements. A linear relation between the cavity transmitted signal amplitude and the H2CO concentration was obtained within the range of 0−5 ppm. A 1σ detection limit of 25 parts-per-billion (ppb) was achieved with an averaging time of 1 s based on Allan-Werle variance analysis. The reported dual-feedback RF modulation based PDH technique led to a method for gas detection using a similar experimental setup and measurement scheme.Item Near-infrared acetylene sensor system using off-axis integrated-cavity output spectroscopy and two measurement schemes(Optical Society of America, 2018) Zheng, Kaiyuan; Zheng, Chuantao; He, Qixin; Yao, Dan; Hu, Lien; Zhang, Yu; Wang, Yiding; Tittel, Frank K.For highly sensitive and accurate acetylene (C2H2) detection, a near-infrared (NIR) off-axis integrated-cavity output spectroscopy (OA-ICOS) sensor system based on an ultra-compact cage-based absorption cell was proposed. The absorption cell with dimensions of 10 cm × 8 cm × 6 cm realized a dense-pattern and an easily-aligned stable optical system. The OA-ICOS sensor system employed a 6cm-long optical cavity that was formed by two mirrors with a reflectivity of 99.35% and provided an effective absorption path length of ∼9.28 m. The performance of the C2H2 sensor system based on two measurement schemes, i.e. laser direct absorption spectroscopy (LDAS) and wavelength modulation spectroscopy (WMS) is reported. A NIR distributed feedback (DFB) laser was employed for targeting a C2H2 absorption line at 6523.88 cm−1. An Allan deviation analysis yielded a detection sensitivity of 760 parts-per-billion in volume (ppbv) for an averaging time of 304 s using the LDAS-based OA-ICOS. A detection sensitivity of 85 ppbv for an averaging time of 250 s was obtained using the WMS-based OA-ICOS, which was further improved by a factor of ~9 compared to the result obtained with the LDAS method. The proposed sensor system has the advantages of reduced size and cost with acceptable detection sensitivity, which is suitable for applications in trace gas sensing in harsh environments and weight-limited balloon-embedded observations.Item Repetitively Mode-Locked Cavity-Enhanced Absorption Spectroscopy (RML-CEAS) for Near-Infrared Gas Sensing(MDPI, 2017) He, Qixin; Lou, Minhan; Zheng, Chuantao; Ye, Weilin; Wang, Yiding; Tittel, Frank K.A Pound-Drever-Hall (PDH)-based mode-locked cavity-enhanced sensor system was developed using a distributed feedback diode laser centered at 1.53 µm as the laser source. Laser temperature scanning, bias control of the piezoelectric ceramic transducer (PZT) and proportional-integral-derivative (PID) feedback control of diode laser current were used to repetitively lock the laser modes to the cavity modes. A gas absorption spectrum was obtained by using a series of absorption data from the discrete mode-locked points. The 15 cm-long Fabry-Perot cavity was sealed using an enclosure with an inlet and outlet for gas pumping and a PZT for cavity length tuning. The performance of the sensor system was evaluated by conducting water vapor measurements. A linear relationship was observed between the measured absorption signal amplitude and the H2O concentration. A minimum detectable absorption coefficient of 1.5 × 10–8 cm–1 was achieved with an averaging time of 700 s. This technique can also be used for the detection of other trace gas species by targeting the corresponding gas absorption line.