Browsing by Author "Hadar, Ido"

Now showing 1 - 2 of 2
  • Thumbnail Image
    Item
    High-phase purity two-dimensional perovskites with 17.3% efficiency enabled by interface engineering of hole transport layer
    (Elsevier, 2021) Sidhik, Siraj; Wang, Yafei; Li, Wenbin; Zhang, Hao; Zhong, Xinjue; Agrawal, Ayush; Hadar, Ido; Spanopoulos, Ioannis; Mishra, Anamika; Traoré, Boubacar; Samani, Mohammad H. K.; Katan, Claudine; Marciel, Amanda B.; Blancon, Jean-Christophe; Even, Jacky; Kahn, Antoine; Kanatzidis, Mercouri G.; Mohite, Aditya D.
    State-of-the-art p-i-n-based 3D perovskite solar cells (PSCs) use nickel oxide (NiOX) as an efficient hole transport layer (HTL), achieving efficiencies >22%. However, translating this to phase-pure 2D perovskites has been unsuccessful. Here, we report 2D phase-pure Ruddlesden-Popper BA2MA3Pb4I13 perovskites with 17.3% efficiency enabled by doping the NiOX with Li. Our results show that progressively increasing the doping concentration transforms the photoresistor behavior to a typical diode curve, with an increase in the average efficiency from 2.53% to 16.03% with a high open-circuit voltage of 1.22 V. Analysis reveals that Li doping of NiOX significantly improves the morphology, crystallinity, and orientation of 2D perovskite films and also affords a superior band alignment, facilitating efficient charge extraction. Finally, we demonstrate that 2D PSCs with Li-doped NiOX exhibit excellent photostability, with T99 = 400 h at 1 sun and T90 of 100 h at 5 suns measured at relative humidity of 60% ± 5% without the need for external thermal management.
  • Thumbnail Image
    Item
    Long periodic ripple in a 2D hybrid halide perovskite structure using branched organic spacers
    (Royal Society of Chemistry, 2020) Hoffman, Justin M.; Malliakas, Christos D.; Sidhik, Siraj; Hadar, Ido; McClain, Rebecca; Mohite, Aditya D.; Kanatzidis, Mercouri G.
    Two-dimensional (2D) halide perovskites have great promise in optoelectronic devices because of their stability and optical tunability, but the subtle effects on the inorganic layer when modifying the organic spacer remain unclear. Here, we introduce two homologous series of Ruddlesden–Popper (RP) structures using the branched isobutylammonium (IBA) and isoamylammonium (IAA) cations with the general formula (RA)2(MA)n−1PbnI3n+1 (RA = IBA, IAA; MA = methylammonium n = 1–4). Surprisingly, the IAA n = 2 member results in the first modulated 2D perovskite structure with a ripple with a periodicity of 50.6 Å occurring in the inorganic slab diagonally to the [101] direction of the basic unit cell. This leads to an increase of Pb–I–Pb angles along the direction of the wave. Generally, both series show larger in-plane bond angles resulting from the additional bulkiness of the spacers compensating for the MA's small size. Larger bond angles have been shown to decrease the bandgap which is seen here with the bulkier IBA leading to both larger in-plane angles and lower bandgaps except for n = 2, in which the modulated structure has a lower bandgap because of its larger Pb–I–Pb angles. Photo-response was tested for the n = 4 compounds and confirmed, signaling their potential use in solar cell devices. We made films using an MACl additive which showed good crystallinity and preferred orientation according to grazing-incidence wide-angle scattering (GIWAXS). As exemplar, the two n = 4 samples were employed in devices with champion efficiencies of 8.22% and 7.32% for IBA and IAA, respectively.