Armeniades, C. D.2009-06-042009-06-041990Nandi, Ranjan Kaushik. "Flexural creep in pure and filled acrylic resin systems." (1990) Master’s Thesis, Rice University. <a href="https://hdl.handle.net/1911/13456">https://hdl.handle.net/1911/13456</a>.https://hdl.handle.net/1911/13456The creep behavior of poly (methyl methacrylate) and acrylic polymer concrete (PC) systems based on methyl methacrylate was studied in flexure. Creep in both pure and filled systems followed a power law time dependence. A differential form of the power law equation was used to eliminate the irregularities associated with time-independent and transient strains in the experimental data. de$\sb{\rm tot}$/dt = ln nk + (n $-$ 1) ln t where e$\sb{\rm tot}$ is the total strain and n and k are constants in the power law equation. Plots of creep rates versus time yielded good linear fits to the data, the slopes providing values for 'n', the power exponent. Vertical superposition was then used to reduce data at different stresses and resin contents, for the PCs onto a single master curve using different shift-factors. This data reduction was expressed in the form of an empirical expression: e(t, S, v) = e$\sb0$(ref). EXP (K$\sb{\rm S}$. (S $-$ S$\sb{\rm ref}$)). EXP (K$\sb{\rm v}$. (v $-$ v$\sb{\rm ref}$)). t$\sp{\rm n}$ which expresses the total creep strain as a product of separable functions of time (t), stress (S) and the resin volume fraction (v).125 p.application/pdfengCopyright is held by the author, unless otherwise indicated. Permission to reuse, publish, or reproduce the work beyond the bounds of fair use or other exemptions to copyright law must be obtained from the copyright holder.Chemical engineeringEngineeringMaterials scienceCivil engineeringThesisThesis C.E. 1990 Nandi