Padley, B. Paul2009-06-042009-06-042004Pawloski, Gregory J.. "Testing of the muon port card and related electronics for the CMS endcap muon trigger system." (2004) Master’s Thesis, Rice University. <a href="https://hdl.handle.net/1911/17720">https://hdl.handle.net/1911/17720</a>.https://hdl.handle.net/1911/17720This thesis is related to the design of the level one endcap muon trigger system for the Compact Muon Solenoid (CMS) experiment at the Large Hadron Collider (LHC). This system is designed to use muon measurements to help reduce a computationally overwhelming 40 MHz signal of collision data (&sim;40 TBytes/sec) to a manageable 33kHz (&sim;33GBytes/sec) [1]. The main focus of this thesis will be on the validation of one of the electronics boards in the trigger device chain. This board is used to pick the 3 most interesting muons out of 18 measured in a single crossing. Referred to as the Muon Port Card, this card will be located on the periphery of the detector and can be tested through a VME back plane.79 p.application/pdfengCopyright is held by the author, unless otherwise indicated. Permission to reuse, publish, or reproduce the work beyond the bounds of fair use or other exemptions to copyright law must be obtained from the copyright holder.ElectronicsElectrical engineeringParticle physicsElementary particlesHigh energy physicsThesisTHESIS PHYS. 2004 PAWLOSKI